GASSERHELI.COM
HomeE-StoreNewsMORPHISMAVERICKFRENZY 90FREESupportContact
BRUTE
GFZ
BRUTE
BRUTE - Performance Gasser conversion for TZ90V2/FRENZY 90


 The Brute is a performance enhanced gasser based on TZ90V2 mechanics & components. It is a concept performance platform that lead to the development of the Morphis.



TZ 90 Frenzy redesigned for;

  • Improved geometry 
  • Improvred C.G Weight distribution
  • Direct servo to swash setup
  • Weight reduction for extended flight performance
  • Vibration isolation for tank
  • Provision for both 120 & 140 degree swash plate setup
  • Additional frame bracing doubling up part No.TZ1820 frame brace
While The GFZ kit is quite 3D capable the Brute has been specifically tailored for 3D flight & extended range / flight time performance.
Available as Belt Drive (recommended) & TT kits to order.




 The Brute is a performance enhanced gasser based on TZ90V2 mechanics & components with full frame development. Redesigned for;

  • Improved geometry 
  • Improvred C.G Weight distribution
  • Direct servo to swash setup
  • Weight reduction for extended flight performance
  • Vibration isolation for tank
  • Provision for both 120 & 140 degree swash plate setup
  • Additional frame bracing doubling up part No.TZ1820 frame brace
While The GFZ kit is quite 3D capable the Brute has been specifically tailored for 3D flight & extended range / flight time performance.
Available as Belt Drive (recommended) & TT kits to order.


Frame spacers used for servo offset with positions for both 120 & 140 degree ccpm setups. 140 degree swash linkage used at servo arm for correct geometry. All are standard TZ90 parts.


Anti rotational bracket holder is a cut section from the engine mount supplied with the original kit. Two brackets can be obtained from the engine mount. The cut is filed & sanded to a smooth scroll finish. The anti rotational Ball link is obtained from a Trex700E.


Additional frame bracing doubling up part No.TZ1820 frame brace.


New position of tail servo (left or right) reuses linkage with no modification. Below Trex 700N tank with isolation brackets & upgraded T6 cnc mounting brackets.






HomeE-StoreNewsMORPHISMAVERICKFRENZY 90FREESupportContact